The table below describes the contents of the Kodak® Magnus™ 800 personal parts kit (part number 518-01794A).
| Part Number | Description |
| 405E04000 | Spiral wrapping - 0.5 m |
| 203B10280 | Cutter/grom.w/adhsi - 0.5 m |
| 138A00040 | Photo Interrupter w=5 mm w/conn |
| 138A00100 | Photo sensor 2-30 mm w/conn |
| 203A10030 | Mini cable tie 140 mm |
| 203A10050 | Standard cable tie 170 mm |
| 220-01256A | Magnetic sw (cass. det.) |
| 220-01257A | Magnetic sw (cass. int.) |
| 252-05960A | Shim, cylinder, roller, 0.5 mm |
| 252-05961A | Shim, cylinder, roller, 1.0 mm |
| 252-05962A | Shim, cylinder, LEC actuator, 0.5 mm |
| 252-05963A | Wrench open and ring, 17 mm, L = 300 - 300 mm |
| 252-06768A | Shim, cylinder, TEC actuator, 1.0 mm |
| 252-06769A | Shim, cylinder, TEC actuator, 0.5 mm |
| 252-07396A | Puller shims |
| 304-00026 | Ribbed lock washer, M6, ST |
| 304-00028 | Ribbed lock washer, M4, ST |
| 304-00029 | Ribbed lock washer, M6, ST, BLK, OXD |
| 304-00031 | Ribbed lock washer, M3, ST |
| 318-00226 | Spring, ext, OD=0.25", WD=0.022", L=0.875", mw |
| 340-00011 | Vacuum generator, 6 tube to 6 tube |
| 340-00016 | Cup, silicone bellow vacuum, D=20 |
| 343A01004 | O-ring BUNA-N ID = 0.301 OD = 0.441" |
| 360-00004 | Male thread bumber, M6 |
| 380A57110 | SOC CAP STST A2 DIN912 M6 x 16 |
| 380A57180 | SOC.CAP M6X35 STST DIN912 A2 |
| 391A3L789 | RSC box 230 x 185 x 95 singlewall |
| 402-00126 | Grease, microlube GL261,40 gr. |
| 402-00207 | Grease, urethyn E/M1,400 gr. |
| 503-00187A | W_GAP_DET brd assembly |
| 503-00188B | 2W_GAP_DET brd assembly |